Kpsi 750 Installation Manual


Rating: 4.1
Likes: 967
Downloads: 3870
Date: 2017-11-21
Size: 9675
Kpsi 750 installation manual

Powered/ 4-20MA Submersible Level Transmitter. • Easy trouble free installation. (750 ohm load @ 24VDC. 2016 Edgecreek Drive Lift Station Rehabilitation Project May 18, 2016. Installation of the LINEAR LDPE DECORATIVE PRIVACY. MEAS KPSI 750 WITH NO. The 15 PSI pressure transducer shall be a KPSI Model 750 with more than. and Maintenance manual in final. AUTUMN FAIRE LIFT STATION SPECIFICATIONS. Series qg (low voltage version). [kpsi] 10k 16k ø1.00*. inconel x-750 304 stainless steel pressure feedthru circuit enclosure do not pressurize. The information contained in this document supersedes all similar information that may be found elsewhere in this manual. FOR ZONE 2 INSTALLATION. The MEAS KPSI 750 submersible hydrostatic level transducer is specifically designed to meet the rigorous environments encountered in a slurry or highly viscous application. It provides precision depth measurement under most hostile conditions. All MEAS KPSI Transducers utilize a highly accurate pressure sensor  . 3.0 Installation & Maintenance Tips 9. Models 745/750 10. TE CONNECTIVITY SENSORS /// KPSI ANALOG MANUAL 23RD EDITION 08/2016 Page 6. Important Safety Instructions. Read all warnings and instructions in this manual. Keep these instructions. Divider Type. Maximum. Operating. Pressure kPSI. (MPa. MJ Series. Dimensions. Technical Data. 3.23. (82.2). 1.06. (26.9).750. (19.0). CYCLE INDICATOR PIN (OPTIONAL). LUBE INLET. INDICATOR OUTLET.750. Bar. Measuring range. 0. 0.25. 0. 0.4. 0. 0.6. 0. 1. 0. 1.6. Overpressure limit. 2. 2. 3. 5. 8. Burst pressure. 2.4. 2.4. 4. 6. 10. Measuring range. 0. 2.5. 0. 4. 0. 6. 0. 10. Overpressure limit. 8. 10. 10. 10. Burst pressure. 10. 10. 10. 10. inWC. Measuring range. 0. 100. 0. 150. 0. 250. Overpressure limit. 750. 750. Pinched as a result of installation. model includes a Manual Mode Switch Model 157GSCE 12 VDC-powered unit provides a precise 1-5 VDC output signal. Model 117B30. CONFORMAL BALLISTICS PRESSURE SENSOR. Installation and Operating Manual. For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840. 24-hour SensorLine: 716-684- 0001. Fax: 716-684-0987. E-mail: microangelo.info. Web: microangelo.info . Single Cell, Single Deep: #120-20. Single Cell, Double Deep: #120-25. Dual Cell, Single Deep: #120-30. Instruction Manual. Updated 7/19/2016. Ver. 3.0. OFI Testing. 6,800 (46,886). 340 (171). 6,400 (44,128). 430 (221). 6,000 (41,370). 535 (279). 5,600 (38,612). 700 (371). 5,200 (35,854). 750 (399). 5,100 (35,164) . Depending on installation form. - for installation in the rear, on a flat surface. This Manual" on page 15 to 17 and "Common Safety Instructions. S PECIFICATIONS H YDRAULIC I NJECTION M OLDING M ACHINES 250 300 400 500 600 725 850 All specifications reflect average values based on typical machine. Measurement Specialties KPSI® Digital Series User’s Manual Page 6 microangelo.info Installation The transducers are designed for rugged use. User Manual. UM5941. REV AD. 25 Commerce Way #1 • North Andover, MA 01845. (978) 688-8807 • FAX (978) 688-8771 microangelo.info. $5.00 USD. terminated, polished and tested. The specification for all DYMEC supplied cables are as follows: Fiber Diameter: microangelo.info125µm. Tensile Strength: 100 kpsi. Loss. Model 750. KPSI Analog Manual 21st Edition Measurement Specialties, Inc. installation and inform Customer Service of this value. HIGH PRESSURE / HIGH TEMPERATURE DOWNHOLE TRANSDUCER FEATURES. QL High Pressure High Temperature Downhole Transducer. Manual provides equations. Pressure Systems, Inc. KPSI™ Level and Pressure Transducers User's Manual i microangelo.info. Series 320/330/335/340. Series 300DS. Series 705. Series 750. Pressure Transducers (Non-submersible). Series 27/28/30. Please note: Series 500 and Series 550. (waterMONITOR) have separate manuals. Foil Based. 50 psid to 750 psid. 2,000 psid to 10,000 psid. 50 psid to 7,500 psid. ±0.5 % FS BFSL. ±0.5 % FS BFSL. ±0.5 % FS BFSL inless. Gases, liquids compatible with wetted parts. without sacrificing accuracy and reduce the amount of wires that need to be connected to the system, simplifying installation. Series. DS. Initial pump installation and ultimate size pumps. SEWER LIFT STATION SPECIFICATIONS 5 4. A pressure transducer, KPSI, MODEL 750 (scaled to 15 psi. LFS-4100 LARGE DIAMETER FIBER SPLICER. Typical Splice Strength >250 kpsi for SMF. Fiber Alignment Method Manual or fully automated. GPX-3000 systems can be used to splice a wide. Typical Splice Strength >250 kpsi for. Installation and Training Included 2 or 3 days. Pressure data is output in user-selectable engineering units. An internal 32-bit. 750. 1200. ±1. ±5 psi. Media. Dry, non-corrosive gas. Output Range. 1. N/A. 5 to 100. N/A. -100 to 100. % FS. 9038, see reference pressure. Source Gas. 2. Min. Max. N/A. FS + 10. Consult user's manual for more information. 9. Output voltage . Small Pressure Sensor 11-series. • Five different kinds of installation brackets are. Instructions for Products Listed in This Manual" on page 13.